<!-- Generated from https://github.com/nielsmadan/agentic-coding — edits here are overwritten. -->

Second Opinion Command

Get input from the available independent advisors on the current problem or question. Consult the advisor CLIs you are not — from claude, codex, pi, opencode and droid, skip whichever one you are running as, and query the rest. By default, iterates if responses lack confidence.

Usage

/second-opinion <question or context>
/second-opinion --quick <question>        # Single pass, no iteration
/second-opinion --words=300 <question>    # Limit response to 300 words
/second-opinion --timeout=120 <question>  # Set timeout to 120s
/second-opinion                           # Uses current conversation context

Parameters

Parameter	Default	Description
--quick	off	Single pass, no iteration
--timeout	300	Timeout per advisor in seconds
--words	500	Max words per advisor response

Gotchas

• .second-opinion.md is written to the project directory and is NOT gitignored by default. If cleanup is skipped (error, timeout), it can be accidentally committed.
• The advisor CLIs must be installed. If one is missing or fails, the command continues with the others and that advisor's input is simply absent from the synthesis.
• The advisors are meant to read the code — that's the point. All advisors run in read-only mode so they can read/explore the repo but cannot modify it. Point them at the relevant files in the prompt; reading them stays fast (~15–25s). Always close stdin with </dev/null on advisor commands.
• Claude runs non-interactively in print mode (claude -p). Give it the read-only built-ins (--tools "Read,Grep,Glob") so it can explore but not edit, and --disable-slash-commands so it can't recurse into skills.
• Codex blocks on "Reading additional input from stdin..." unless stdin is closed (</dev/null), and prompts for confirmation outside a git repo unless given --skip-git-repo-check.
• The advisor's identity is the model, not the CLI. Pi and OpenCode use the explicit models in the commands below, from two different labs, so their opinions stay independent of each other.
• Pi needs -p for non-interactive mode and --no-session so the consultation does not land in the session list. Restrict it with --tools read,grep,find,ls; the allowlist excludes write and delegation tools. A model newer than Pi's cached catalog warns Model "…" not found for provider "openrouter". Using custom model id. and then works normally — that warning is not a failure.
• OpenCode bills through OpenRouter — models must use the openrouter/ prefix (opencode/* is OpenCode Zen, which has no payment method and errors out). Use --agent plan with the per-run task denial below. Plan mode alone can delegate to other agents.
• Headless gotcha: OpenCode evaluates each part of a compound (;/&&/|) bash command separately and takes the least-permitted verdict; with stdin closed there's no TTY to answer an ask prompt, so the whole call is auto-rejected and the run terminates before producing any prose. The classic trigger is a benign echo --- separator inside an otherwise-allowed read chain. The prompt template already tells the advisor to avoid chaining; if a run still dies with no output, suspect a chained command hitting an un-allowlisted token.

How It Works

Default Flow (Iterative)

1. Summarize the current problem/question from the conversation (or use what the user provides)
2. Query advisors in parallel for their perspectives
3. Evaluate confidence in all responses
4. If confidence is LOW for any advisor, re-query with additional context (up to 2 iterations)
5. Present final results with your synthesis

Quick Mode (--quick)

1. Query all advisors once
2. Present results immediately without iteration
3. Useful when you just want fast input without refinement

Execution

Step 1: Prepare the Context

Extract or use the user's question/problem. If not explicitly provided, summarize:

• What is the current task or problem?
• What approaches are being considered?
• The relevant file paths — list them so the advisors know where to look. This is what makes the opinion code-aware rather than generic; spend effort here.

Write the prompt to .second-opinion.md in the current working directory (dotfile so it stays out of the way; in the project directory so the advisors can read both it and the code it points to). Use this exact filename for all subsequent steps:

Read-only consultation. Do not modify any files — but DO read the relevant code in this project before answering.

Do not dispatch subagents or launch other agent CLIs; answer this consultation yourself.

Shell use: prefer your built-in file-reading tool. If you do run shell commands, run ONE simple command at a time — do NOT chain with `;`, `&&`, or `|` and do NOT add `echo` separators. This is a headless session, so any command that would need confirmation is auto-declined, and a single declined command ends the run before you can answer. A chain is only as permitted as its least-permitted part.

I need a second opinion: {problem_summary}

Relevant files/areas to look at: {file_paths}

Read those (and anything else in the project you need) and give your perspective in {words} words or less. Reference specific functions/files so I know what you looked at. Focus on:
- Key considerations I might be missing
- Potential issues with the current approach
- Alternative approaches worth considering

If you need more context to give a confident answer, say so clearly.

Step 2: Query Advisors (in parallel)

Run the advisor commands in parallel — skipping the CLI you are running as — using {timeout} as the Bash timeout. Each inlines the prompt via $(cat .second-opinion.md) and closes stdin with </dev/null. All advisors run read-only and read the files the prompt points them at, typically answering in ~15–25s; allow longer for a question that spans many files.

Prefix the advisor commands with the command builtin where shown: in some shells they are wrapper functions that depend on an interactive-shell variable not present in the agent's environment; command bypasses the wrapper and runs the real binary, which authenticates via its own on-disk credentials. If a bare binary instead exits not-logged-in, its credential comes from the wrapper — drop the prefix for that one.

Claude: read-only built-ins, no slash commands, print mode. Leave claude unprefixed — do not put command in front of it:

claude --tools "Read,Grep,Glob" --disable-slash-commands --no-session-persistence -p "$(cat .second-opinion.md)" </dev/null

Codex: read-only sandbox with both agent backends disabled; --skip-git-repo-check permits use outside a git repo:

command codex exec -s read-only --skip-git-repo-check --disable multi_agent --disable multi_agent_v2 -c agents.enabled=false "$(cat .second-opinion.md)" </dev/null

Use the Pi and OpenCode model ids and max reasoning settings below exactly, including in --quick mode. Change them only when the user explicitly requests it. If a selected model or reasoning level is unavailable, report that advisor as unavailable and continue with the others.

Pi: --tools is the read-only guard (no edit/write/bash). Pi has no -m short flag — it is --model:

command pi -p --no-session --tools read,grep,find,ls --model openrouter/z-ai/glm-5.3 --thinking max "$(cat .second-opinion.md)" </dev/null

OpenCode: use plan mode and deny its task tool for this consultation. The inline config applies only to this process:

OPENCODE_CONFIG_CONTENT='{"agent":{"plan":{"permission":{"task":"deny"}}}}' command opencode run --agent plan -m openrouter/moonshotai/kimi-k3 --variant max "$(cat .second-opinion.md)" </dev/null

Droid: Gemini 4 Argon at high effort, with file-reading and search tools only:

command droid exec --model gemini-4-argon --reasoning-effort high --only-tools Read,Glob,Grep,LS -f .second-opinion.md </dev/null

Use this model and reasoning level in quick mode too. If unavailable, report Droid as unavailable and continue with the other advisors.

Step 3: Evaluate Confidence

After receiving responses, evaluate each for confidence level:

High Confidence Indicators:

• Direct, specific recommendations
• References to specific code, files, or patterns
• Clear reasoning with concrete examples
• Definitive statements about approach

Low Confidence Indicators:

• Hedging language: "It depends", "possibly", "might", "could be"
• Requests for more context: "I'd need to see", "without more context"
• Very generic advice that could apply to any situation
• Uncertainty markers: "I'm not sure", "hard to say"
• Questions back to you about the problem

Step 4: Iterate If Needed (Default Mode Only)

If confidence is LOW for any advisor:

1. Identify what context is missing based on their feedback
2. Gather additional context (read relevant files, clarify requirements)
3. Overwrite .second-opinion.md with enhanced context
4. Re-query the low-confidence advisor using the same command
5. Can iterate up to 2 times per advisor

Skip this step entirely if --quick flag was used.

Step 5: Present Results

Format the responses for the user:

## Second Opinions

### {advisor 1}
{advisor_1_response}

### {advisor 2}
{advisor_2_response}

### {advisor 3}
{advisor_3_response}

### {advisor 4}
{advisor_4_response}

### My Take
{your brief synthesis - where they agree, disagree, and your recommendation}

Include one heading per responding advisor.

Name each advisor heading after the CLI and the model it ran (e.g. Codex, Pi (<model>)).

If iteration occurred, note it:

*Note: Re-queried {advisor} with additional context after initial response lacked confidence.*

Step 6: Clean Up

Delete .second-opinion.md using the Bash tool:

rm .second-opinion.md

Timeouts

Use the {timeout} value (default 300s) for each advisor's Bash timeout.

Error Handling

• If one advisor fails, continue with the others
• If all fail, inform the user and offer to retry

Key Differences from /debate

Aspect	/second-opinion	/debate
Rounds	1-3 (with iteration)	1-10
Quick mode	Yes (--quick)	No
State files	None	Full state tracking
Session mgmt	No sessions	UUID tracking
Output files	None	rounds/, synthesis.md
Purpose	Quick check	Deep analysis
Speed	~1-3 min	5-30 min
Read-only	Yes (enforced)	Configurable

Examples

/second-opinion Should I use useCallback here or is it premature optimization?
/second-opinion Is this the right place to add error handling?
/second-opinion Review my approach to implementing this feature
/second-opinion --quick Just tell me if this pattern looks right
/second-opinion  # Uses current context from conversation

Troubleshooting

Advisor times out or fails to respond

Solution: Increase the timeout with --timeout=600 or use --quick to skip iteration.