S32CT Pins - Headless Facade

Thin per-tool facade over the generic s32ct-cli skill that exposes only the flags relevant to the Pins tool of S32 Configuration Tools. This skill fronts the nxp_s32ct_execute_action MCP tool with action_name="s32ct.configure_pins" (the tool_name is pre-filled from the action). All shared launcher plumbing, validation, and auto-retry behavior is inherited from s32ct-cli.

When to use

Use this skill when:

• You need to regenerate pin-mux source from a .mex.
• You need to import existing .c pin definitions via -ImportC before regeneration.
• You need to bootstrap Pins from -EmptyConfig (requires mcu + sdk_version).
• You need to export Pins artifacts: source, CSV, HTML, registers, or MEX.

Migration note: The standalone pins MCP tool no longer exists - it has been replaced by the standardized action surface: run it as s32ct.configure_pins through nxp_s32ct_execute_action. Existing inputs are unchanged.

Do not use this skill for:

• Cross-tool operations combining flags from multiple tools -> use s32ct-cli (s32ct.configure_cli).
• Clocks / Peripherals regeneration - use the matching facade.

Available Capabilities

Type	Name	Invocation
MCP tool	nxp_s32ct_execute_action	nxp_s32ct_execute_action(action_name="s32ct.configure_pins", params={...})
Resource	skill://nxp_s32ct/s32ct-pins-facade	Auto-loaded on trigger

Quickstart

1. Load or bootstrap a .mex

Tool:    nxp_s32ct_execute_action
Action:  s32ct.configure_pins
Input:   project_path="<path>.mex"   # OR empty_config=True + mcu + sdk_version
Output:  {exit_code, command, stdout_tail, stderr_tail, values, summary}

2. Apply Pins-specific modifications and export

nxp_s32ct_execute_action(
    action_name="s32ct.configure_pins",
    params={
        "project_path": "<path>.mex",
        "import_c": ["<a>.c", "<b>.c"],           # -ImportC
        "custom_copyright": "<header>.txt",        # -CustomCopyright
        "output_path_overrides": "<rules>.txt",    # -OutputPathOverrides
        "export_kind": "ExportSrc",                # or ExportAll|ExportCSV|ExportHTML|
                                                   #    ExportRegisters|ExportMEX
        "output_dir": "<output-dir>",
    },
)

3. Verify the export

Check that output_dir contains the expected artifacts and exit_code == 0.

Inputs

Mode (mutually exclusive)

• project_path - existing .mex to load via -Load.
• empty_config - if True, -EmptyConfig; requires mcu + sdk_version.
• config_name - -ConfigName <...>.

Tool-specific

• import_c - paths to existing .c files imported via -ImportC before regeneration.
• custom_copyright - header file inserted via -CustomCopyright.
• output_path_overrides - rules file via -OutputPathOverrides.

Export

• export_kind in {ExportAll, ExportSrc, ExportCSV, ExportHTML, ExportRegisters, ExportMEX}.
• output_dir - required when export_kind is set.

Launcher / plumbing (shared with s32ct-cli)

• data_dir (-data <workspace>), extra_args, s32ct_launcher, launcher_ini, timeout_s (default 600).

Output

Same as s32ct-cli: { exit_code, command, stdout_tail, stderr_tail, values, summary }.

Guardrails

Scope

• Only drives the pins action of nxp_s32ct_execute_action. For cross-tool workflows use s32ct-cli (s32ct.configure_cli) instead.
• Does not modify hardware or program devices.

Destructive actions

• Exports overwrite files in output_dir. Confirm the target directory is safe or empty before invoking with export_kind set.

Refuse-and-escalate

• Missing project_path AND missing empty_config/mcu/sdk_version combination -> ask which mode.
• Unknown export_kind value -> list allowed values.
• Retryable IllegalStateException -> auto-retry once, then escalate.

Validation loop

1. exit_code == 0.
2. output_dir contains the expected artifacts for the chosen export_kind.
3. For source exports: files compile / parse cleanly in a follow-up step.

Out of scope

• Interactive GUI operations - use S32 Configuration Tools directly.
• Cross-tool operations combining multiple tools' flags - use s32ct-cli.
• Distribution portability handled transparently; see s32ct-distributions.

See Also

• s32ct-cli - generic dispatcher with the full ~50-parameter surface.
• s32ct-distributions - launcher selection.
• s32ct-clocks-facade, s32ct-peripherals-facade - sibling regeneration facades sharing the custom_copyright / output_path_overrides pattern.